How To: Ubiquiti NanoBeam as WIFI access point

1. 設定你的 Notebook / PC 的 network card 為固定 IP address (我選了 192.168.1.10 )
2. 連接你的 Notebook / PC 的 network card 到 NanoBeam.
3. Web login https://192.168.1.20 , user name / password: ubnt
4. Web :Ubiquiti Logo – airMax – Disable.
5. Web :Wireless : Wireless Mode : Access Point, DFS -Disable , Change SSID , Wireless Security – WPA2-AES,WPA Authentication – PSK. (有些手機只可用 20M bandwidth, 否則看到 SSID 但連不上)

1. 設定你的 Notebook / PC 的 network card 為固定 IP address (我選了 192.168.1.10 )

Windows:

windows command prompt :(找出 network card name)
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection :

(network card name = Local Area Connection)

windows command prompt :(設定你的network card 為固定 IP address)
netsh interface ip set address name=”Local Area Connection” static 192.168.1.10 255.255.255.0 192.168.1.1

windows command prompt :(之後復元 setting)
netsh interface ip set address name=”Local Area Connection” dhcp

4. Web :Ubiquiti Logo – airMax – Disable.

AP_Setting01